Meiko FV250.2AC Utensil Washer Cold Fill 1490x895x2490mmH

Stock Code: W2161

Descriptions

Manufacturers Two Years Parts and Labour Warranty With hood open 2490 mm high, Passing height of 890 mm, Basket size 1310 x 700 mm 19.83 kW three phase cold fill

FV250.2-AC front loading electric heating powerful utensil washer with .2 AirConcept energy saving heat recovery condensing unit for all kinds of kitchen utensils, pots, pans, trays and containers. With MIKE-2 electronic control and infrared data capture tool. Machine constructed throughout in type 304 (1.4301) high grade stainless steel and with full external stainless steel cladding. Additional features include pressed tank with large radius coved corners, double wall construction for excellent sound and heat insulation and sloped internal upper wash tank surfaces to prevent dripping onto clean items.

Provided with the following features: -

120/240/480 second programmes, Water connection 1 x 22 mm ¾” BSP, Suitable for cold fill, Water supply pressure 1-5 bar ,Minimum flow rate 5lt/min , Tank fill capacity 100lt, Final rinse consumption 9.0lt/basket , Waste connection 1 x 40 mm Ø standing waste, Wash pump rating 2 x 2.2 kW, Detergent dosing pump incorporated, Rinse aid dosing pump incorporated, Hose and cable connection kit supplied, Drain pump and rinse booster pump fitted as standard

Drain pump for high level waste outlet , Soft start feature on wash pump motor, Rotating upper and lower rinse arms

Rotating upper and lower wash arms, Aqua-stop system for water leak detection, Aktiv plus double filtration of wash water, Perforated covers over wash tank, Infrared interface for exchange of data services, Touch sensitive control (no switches), Class ‘A’ airgap with rinse booster pump, Self-cleaning cycle following drain down ,One (1) FV250.2BV131 stainless steel basket with rollers 1310mm x 700mm

Incorporating Point 2 AirConcept integrated air management unit with built-in self-cleaning heat recovery unit for FV250.2.AC. Machine equipped with built-in self-cleaning nozzles. No additional water needed for the self-cleaning process. Exhaust air extraction program extension time will be 80 seconds. Reduction in radiated heat transmitted from the machine will be 3.1 kW. Exhaust air temperature with incoming water at 12°C will be 25°C.

Reduction of steam volume discharged into the wash-up area will be 80%. Reduction in the connected load of the washing machine will be 3.0kW.A minimum of 20-25 air changes per hour required within the dishwash area for efficient operation of the AC unit